HyEndFed 4 band for 40, 20, 15 and 10 meter.
Max. Power : 100 watt PEP, SSB.
Length : 20 meter.
Enclosure : Polycarbonate IP67, 100% UV resistant.
SO239 Connector Teflon.
All hardware Stainless steel.
No radials or tuner needed.
First, Thanks for the Superior construction Quality,
Thanks for adding a Delrin block at the back, it is a must as I can fix the balun solidly with 2 re-usable Tie Wrap on a small mast, or just a small pipe attached to a pic-nic table. Then the wire in a tree if no tree, a top of my 10 meters fiberglass mast.
Thanks for your fast service. I ordered on Thursday morning, and got it the next tuesday here in Québec, QC Canada.
I' m using RIG EXPERT model AA-54, and my reading on the four (4) bands are exactly the same as the one you show, except on 40 meters, it seems it has been cut for SSB but in cw, in the low part of the band, around 7.025, I read 1:5 to 1 and higher it is rather flat up to around 7.225. So the KX3 tuner or Icom IC-703 tuner take care of it.
I cannot ask more, we are satisfied customers. More reports to come, as we are making many portable operations all around.
Keep on the very good work to all the staff.-
72/73, Michel VE2TH, 72/88, Georgette VE2RH
The XYL/OM QRP Team.-
I'm looking forward to more holidays with the super antenna ...... thanks Ron
Light, small, super stealthy, fantastic performer, directional as sloped from 4th floor in a downtown...
Working QRP with KX2 and getting great reports on SSB, not to mention PSK31 and 63.
It was just a natural thing to take also Ultralight MK2 for portable QRP.
Ron, You just earned another faithful customer and supporter!
Exactly as advertised. Recommended!
Vy 73 M0IKQ.
Ron answers very quickly and professionally!
Thank you so much! I'll recommend your company & this antenna to my ham's friends!
Gisteren hyend 4 bander op gehangen 10 15 20 40 m
Resonantie alle banden perfect geen atu nodig.
Wspr laten draaien met 5 watt 20m band 15 m , met gemak Australië japan new Zeeland usa
40 m s, avonds met gemak qrp Australië usa
Europese landen ook natuurlijk zuid Amerika
Zeer goede antenne .
Ben zeker zeer tevreden.
Uitstekend product cijfer 9 +
Zondag besteld via de site , dinsdag al ontvangen.
Met handige documentatie , zeer tevreden, met montage materialen, plug en play
Van de week plaatsen
Kom er op terug over de werking ervan
I ordered this antenna for a permanent home installation after reading countless great reviews about HyEndfed 's high quality, high performance antennas and excellent service. I can now say that I have to agree wholeheartedly with every one of those reviews, and this antenna has certainly lived up to my expectations in the short time I have been using it.
The antenna arrived very well packaged on my doorstep here in the UK from the Netherlands within 3 days and I was updated personally on the progress of my order, complete with tracking info from Ron via email. How 's that for service!
I have the antenna installed as a sort of sloper in the limited confines of my back garden, with the matching unit farthest away from the house and up at around 6 feet, with about 50+ feet of the radiating wire sloping up to the peak of the house roof at around 30 feet, and then the remaining length sloping over the other side of the roof. So probably not an ideal configuration. It is also a very stealthy antenna.
After connecting the antenna to my little FT817ND, it was apparent that it was receiving extremely well with far better signal to noise ratio than previous unun matched multi band end feds I have used. The antenna works on 40, 20, 15 and 10m without an ATU with the predicted SWR readings, and also 17 and 12m without an ATU, although I have not tried any QSO’s on 17 or 12m as yet. But I’m sure I will!
First contact was into Belarus on 15m with a 59+ report from the op, who could barely believe I was only using 5 watts, followed by several other contacts on various bands with significantly better signal reports than I have previously been used to. My RX has drastically improved also, given my very urban location.
The antenna is made from high quality components and is built to a very high standard indeed. I would expect it to last many, many years. Yes, you pay a little more for these antennas, but they are worthy of the extra cost involved in terms of their superior quality and first rate service you can expect from HyEndfed antennas.
This antenna is definitely going to be a keeper for me!
Thanks again to Ron and Rob. Keep up the good work!
73’s from Gerard Marley M0MGK, Tyne and Wear
Deze namiddag de draadantenne voor de eerste maal in slope opgespannen; niet horizontaal omdat nog een voetsteun ontbreekt om de fiber mast in de grond te zetten.
De ultieme test om te beginnen en te zien of de antenne wel degelijk werkt leek me een beacon van 1w uit te sturen op 20m (in WSPR mode), en wat raad je, meteen raak. Met een VSWR van 1;1.2 en ondanks de slechte condities werd ons baken gehoord tot over de plas : 7421km tot in Florida met een SNR van -19 ! De beacons worden ook goed ontvangen, wat duidt op een goede ontvangst door onze SDR, nogmaals, ondanks de minder goede DX omstandigheden vandaag.
Morgen gaan we terug QRP proberen in JT65, eveneens op 20m. Benieuwd wat de reports zullen zijn in die digital mode ...
Bedankt voor de degelijke makelij !